Basic Instructions To Install A Bidet Converter Kit Attachment

1. Shut off the water supply to the toilet by turning the valve located behind the toilet.
2. Flush the toilet to remove any remaining water in the tank and bowl.
3. Disconnect the water supply hose from the bottom of the toilet tank.
4. Remove the toilet tank lid and set it aside.
5. Attach the bidet converter kit adapter to the bottom of the toilet tank, following the manufacturer’s instructions.
6. Reattach the water supply hose and attach second hose to the bidet converter kit.
7. Turn the water supply back on and test the bidet converter kit by flushing the toilet and adjusting the water pressure as needed.
8. If everything is working properly, replace the toilet tank lid and you’re done!

Note: Some bidet converter kits may require additional steps or modifications to the toilet, so be sure to carefully read and follow the manufacturer’s instructions. It is also a good idea to have a friend or family member assist you with the installation to make it easier and safer.